Step 1

Remove the old NPM unit from the TV including the HDMI and power cable.  You can keep the HDMI cable, please return the old units and power in the original shipping box.  A UPS Return label was included in the box.

Step 2

Plug in the HDMI Cord into the second slot of the Studio Player Device.  Make sure the cord is pressed all of the way into the port.  Plug the other end into the same HDMI port that you had the old NPM unit plugged into.

Step 3

Remove the power adapter from the small white box and connect it to the Studio Player device.    

Warning: Do not power on the device until the HDMI cable is plugged into the TV and the TV is powered on 

Step 4

Attach your Studio Player Device to the backside of your television with the Velcro strip that is already attached to the bottom of the Studio Player device.  The unit should start up and immediately start displaying your content.

Note:  There is a USB key in your shipment.  It is only used for troubleshooting and reconfiguring the Wi-Fi settings on the devices.  Please store in a safe place in case of problems.